FEATURES：
- No Trial mass required
- Unbalance Unit (mg)
- ISO1940 Calculator
- LED Flasher, no expendables
- Auto Angle Positioning
- Spectrum Analyzer
- Add mass or Remove mass
- Graphical display
- USB Plug and Play
- OK/NG Auto Decision
- Not Need Air Source
- Easy Training Interface
- Show milligrams (mg)－Correction once in place
- ISO1940－Global International Standard
- LED Light, no supplies－Environmental protection
- Automatic positioning－Intuitive display, quick use
- Spectrum Analyzer－Analysis of vibration sources
- Add or Remove mass－Easy and Elastic application
- Graphical display－User-friendly Interface
- USB Plug and Play－Quick and Easy installation
- OK/NG Auto judgment－Eliminate Human Mistakes
- No air source required－Reduce wiring, reduce trouble
- Teaching interface－Online guidance, no coaches
| Advantage Characteristics | |||||
| Cycle time | Short | No air source required | Yes | ||
| Balance Unit(mg) | Yes | Graphical Display | Yes | ||
| Precision | High | Quick USB interface | Yes | ||
| ISO1940 | Yes | No Need RPM sensor | Yes | ||
| Spectrum FFT | Yes | Data Reporter | Yes | ||
| Maximal RPM | 10,000(note) | No trial mass required | Yes | ||
| Auto Positioning | Yes | Low expendables parts | Yes | ||
| Go / NoGo | Yes | All in one | Yes | ||
| Memory | Yes | ||||
(note) small fan only.
| Order Information | Model: EZ-301H | Model: EZ-301H-TFT |
| Mechanical Size | 270 x 360 x 330mm | 270 x 360 x 350mm |
| Synchronization Lamp | Yes | Yes |
| Heard Bearing | Yes | Yes |
| TFT Display | -- | Yes |
| Touch Screen | -- | Yes |
| Parameters | Yes | Yes |
| Automatic Positioning | Yes | Yes |
| EZ-301S Hardware Specifications | |
| Suitable fan size | ( 10.0 x 2.0 ) - ( 120.0 x 25.0 ) |
| No of balance planes | Single plane measuring |
| Suitable fan weight (gram) | 120 |
| Maximal speed (rev/min, RPM) | 900 - 20,000 |
| Minimal unbalance (note) (μm) | 0.5 |
| Minimal unbalance (note) (g-mm) | 0.009～0.03 |
| Automatic positioning | Photo ( LED Sync. Lamp) |
| Style of RPM trigger | Fan Current , FG / TTL |
| Mechanical size (L x W x H) (mm) | 270.0 x 360.0 x 330.0 |
| Weight of Machine (Kg) | 28.0 |
| Power source | Single phase 110 - 220V, 2A, 0.5KVA |
Note : the value is depend on fan size.
※Changes to appearance and specifications are subject to change without notice
※Changes to appearance and specifications are subject to change without notice